网站首页
购物车
用户中心
全部产品分类
提示信息
免费咨询行业专家
服务热线
4001027270
| 一般特性 | ||
|---|---|---|
| 感应距离 | 30 ... 500 mm | |
| 调节范围 | 50 ... 500 mm | |
| 盲区 | 0 ... 30 mm | |
| 标准目标板 | 100 mm x 100 mm | |
| 换能器频率 | approx. 380 kHz | |
| 响应延时 | minimum : 25 ms Ex works settings: 45 ms |
|
| 指示灯/操作键 | ||
| 绿色 LED | solid: Power on flashing: Standby mode or IO link communication |
|
| 黄色LED 1 | solid: Object in evaluation range flashing: Learning function, object detected |
|
| 黄色LED 2 | solid: Object in evaluation range flashing: Learning function, object detected |
|
| 红色 LED | 红灯常亮: 出错 红灯闪烁: TEACH-IN 功能下没有检测到目标物 |
|
| 电气特性 | ||
| 工作电压 | 10 ... 30 V DC , ripple 10 %SS | |
| 空载电流 | ≤ 60 mA | |
| 功耗 | ≤ 1 W | |
| 接口 | ||
| 接口类型 | IO-link | |
| 协议 | IO link V1.0 | |
| 传输速率 | Acyclical: typical 240 Bit/s | |
| 循环周期 | min. 13.2 ms | |
| Process data witdh | 16 bit | |
| 输入/输入 | ||
| Input/output type | 1 synchronization connection, bidirectional | |
| 0 Level | 0 ... 1 V | |
| 1 Level | 4 V ... UB | |
| ¿¿¿¿ | > 12 kΩ | |
| 输出额定工作电流 | < 12 mA | |
| 脉冲长度 | 0.5 ... 300 ms (level 1) | |
| Pulse interval | ≥ 14 ms (level 0) | |
| 同步频率 | ||
| 普通工作模式 | ≤ 70 Hz | |
| 多重模式 | ≤ 90 Hz / n , n = number of sensors , n ≤ 10 (factory setting: n = 5 ) |
|
| 输出 | ||
| 输出类型 | 2路推挽输出，短路保护，反极性保护 | |
| 额定工作电流 | 200 mA , short-circuit/overload protected | |
| 电压降 | ≤ 2.5 V | |
| 重复精度 | ≤ 0.1 % of full-scale value | |
| 开关频率 | ≤ 11 Hz | |
| 迟滞范围 | 设定的检测范围的1 % (缺省设置), 可设定 | |
| 温度漂移 | ≤ 1.5 % from full-scale value (with temperature compensation) ≤ 0.2 %/K (without temperature compensation) |
|
